Avionics Integration Engineer, (comm/nav) (f - 15) Qatar

Avionics Integration Engineer (Comm/Nav)

Applied Research Solutions has an exciting opportunity for an Avionics Integration Engineer, (Comm/Nav) located at WPAFB, OH to support the F-15 Qatar program. The Avionics Integration Engineer will apply a full range of acquisition program management philosophy, policies, and procedures, to perform a wide range of acquisition management activities in support of the existing and future F-15 Division aircraft programs. The F-15 Division is responsible for management and professional services, engineering and technical services, and studies, analyses and evaluations to accomplish the unit's mission to design, develop, integrate, test, produce, deploy, modernize, sustain and support U.S. and FMS F-15 fighter aircraft weapon systems and subsystems.

Responsibilities:

• The Contractor shall serve as an avionics engineer with particular emphasis in integration of radar and EW sensors.
• The Contractor shall develop/review/update applicable program documentation for avionics engineering relevant requirements.
• The Contractor shall assist the Government in drafting and developing systems/subsystem specifications and various engineering documents in support of milestone reviews and events.
• The Contractor shall be responsible for development and test of the program system hardware and software and its integration into the program system architecture.
• The Contractor shall attend all technical reviews and provide technical advice on the path forward to installation of the new hardware and software into the system.
• The Contractor shall review 46 system specific test plans and participate in the conduct of system, subsystem, and component testing.
• The Contractor shall support and conduct performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies.
• The Contractor shall support hardware/software development and related system ground and flight test activities including, but not limited to, hardware-in-the-loop, subsystem integration labs, developmental T&E, and initial operational T&E related activities.
• The Contractor shall support and conduct systems analyses to include, but not limited to, avionics system design/design feasibility and state-of-the-art assessment requirements, system capacity analysis, investigate alternative solutions and architecture tradeoffs, support operations concept development and document results.
• The Contractor shall perform analyses of avionics and subsystems including, but not limited to, system threat analysis, laser systems, computer systems, avionics interfaces, and multiplex data bus communications.
• The Contractor shall also identify potential issues and/or areas of improvement for Government consideration.
• The Contractor shall accomplish data processing including centroiding, tracker, timing issues, data loading issues, software; interfaces to combat system and/or automation systems including required data, quantity of data, data merging and integration.
• The Contractor shall accomplish MS&A of radar, targets, and clutter/weather; testing and evaluation of radar system performance including developing test plans and procedures, witnessing tests, and writing test reports for qualification testing, operational field testing, and factory system-level testing.
• The Contractor shall support Aircraft Information Management Systems (AIMS) requirements/testing/certification and spectrum management requirements/testing/certification.
• The Contractor shall use knowledge of Communication Navigation Surveillance/Air Traffic Management (CNS/ATM) requirements, policies, and regulations to define requirements, complete CNS/ATM compliance matrices, and support testing and certification of aircraft and supporting systems.
• The Contractor shall perform technical activities associated with radar waveforms and signal and data processing techniques that provide robust performance in Electro-Magnetic Interference (EMI), Electronic Counter-Measure (ECM), multipath, ducting, and clutter environments.
• These activities may include, but not limited to, phased array and active aperture antennas, adaptive array processing, digital beam forming, klystron and solid state transmitter technologies, receiver and transmitters stability issues, advanced Analog-to-Digital (A/D) 47 technology, EMI, ECM, and EW. Digital signal processing including Moving Target Indication (MTI), pulse Doppler, monopulse, imaging, and adaptive techniques, Constant False Alarm Rates (CFARs), clutter maps, and timing issues.
• The Contractor shall apply an understanding of aeronautical vehicle systems, software, and/or airborne or related ground systems avionics capabilities to support the core engineering tasks as they relate to EW engineering.
• The Contractor shall provide FMS expertise for various FMS programs within the F-15 Division that are in varied DoD acquisition stages to include planning, execution, delivery, sustainment and program closure IAW DoD policies and guidelines.
• The Contractor shall assist with the monitoring, reviewing, analyzing and coordinating security assistance issues concerning DoD and non-DoD agencies to ensure compliance with established policies, LOR, LOA, the Foreign Assistance Act, the AECA, ITAR, and other relevant legislation.
• The Contractor shall assist with Pre-LOA (P&A) and LOA, SOO/SOW development/editing, and reviewing of proposals as assigned by the Government.
• The Contractor shall assist with reviews of various acquisition documents, export licenses, or other documentation submitted by the prime weapon system or original equipment manufacturers for Government review; and assist with release and coordination of Government responses.
• The Contractor shall assist with the implementation and execution of assigned LOAs IAW the AECA, Security Assistance Management Manual, DSCA Manual 5105.38-M and complete assigned projects with no or minimal assistance.
• The Contractor shall provide technical expertise and advice to SAPMs, line managers, and functional team members across all phases of the acquisition process and insight into areas relating to technical policy and lessons learned.
• The Contractor shall ensure requirements are identified to provide initial support for new acquisitions or modifications of weapon systems through sustainment and disposal.
• The Contractor shall work with Government personnel, outside agencies, Contractor personnel, and others to support the program.
• Contractor personnel assist in preparation of technical material for internal and external briefings, presentations, documents and reports.
• Other duties as assigned

Requirements:

• Must be US citizen
• Active Secret Clearance Required
• Advanced Degree (Master of Arts (MA)/Master of Science (MS)) and 12 years of experience in the respective technical/professional discipline being performed, 5 years of which must be in the DoD.
• OR, BA/BS degree, and 15 years of experience in the respective technical/professional discipline being performed, 5 of which must be in the DoD.
• OR, 20 years of directly related experience with proper certifications as described in the Functionally Aligned Job Descriptions, 8 of which must be in the DoD.
• The Contractor shall have leadership experience in wide/varied operational and test organizations and/or fighter/bomber platforms; operational experience as a pilot or weapons system operator in a test environment; F-15 aircraft, systems, and subsystems familiarity; the ability to travel frequently for program reviews and/or site visits; and other airframe, system and sub-system Contractor, test range and laboratory, or customer locations as directed/required.
• The Contractor shall have knowledge of avionics engineering in support of avionics subsystem definition, development, integration, all verification methods to include review of ICD, sustainment, Modeling, Simulation and Analysis (MS&A), T&E, and airworthiness certification across a wide range of hardware and software systems.
• The Contractor shall have knowledge of radar theory and principles, and an understanding of the radar design, development, and implementation process is required.
• Expected activities include providing technical advice and serving as the technical interface between the Government customers and the radar manufacturers, interacting with customers, participating in meetings, and producing technical detailed products.
• The Contractor shall have working knowledge of the ITAR and foreign disclosure processes.
• The Contractor shall have an understanding of the Congressional notification and RIP/RIS approval process and support the Government in working through these processes.
• The Contractor shall understand and provide advice on USG policy and technical requirements for individual countries as it relates to the acquisition programs.

All positions at Applied Research Solutions are subject to background investigations. Employment is contingent upon successful completion of a background investigation including criminal history and identity check. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-741.5(a). This regulation prohibits discrimination against qualified individuals on the basis of disability, and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans, and requires affirmative action by covered contractors