Mechanical Diagnostics Technician (engineered Systems Technician 2/3)

Mechanical Diagnostics Team Technician

This position will be filled at either an Engineered System Technician level 2 or 3 depending on the skills of the selected candidate. The Mechanical Design Engineering Group in Accelerator Operations and Technology Division (AOT-MDE) is made up of mechanical engineers, designers, technicians, and administrative staff whose mission is to provide mechanical engineering support to a wide variety of accelerator technology related challenges in the service of the laboratory's national security mission. AOT-MDE's primary responsibility is the operation and maintenance of the LANSCE Accelerator Facility's mechanical systems. Mechanical Diagnostics Team is one of the four mechanical systems responsible for approximately two hundred electro-mechanical diagnostic devices, about thirty different types such as wire scanners for beam profile measurements, beam current monitors, beam emittance measurement slit and collectors, beam plugs, beam deflectors, stripper foils, and diffusers. These devices provide the beamline data to safely operate the LANSCE accelerator. Each device is a complex assembly made of hundreds (more or less) of small and precise mechanical and electrical components.

We are seeking a highly self-motivated and mechanically inclined Engineered Systems Technician to be a member of the Mechanical Diagnostics Team. The successful candidate will troubleshoot, maintain, repair and rebuild the mechanical and electrical systems of the devices to support accelerator operations and a variety of other accelerator related projects. They will need to demonstrate the ability of following instructions closely and calling supervisor or senior technician when in doubt; working closely with personnel from within and outside the team and a group; interacting and communicating effectively with others; staying highly focused and productive for a long period of time; prioritizing safety of self and others; working independently and as part of the team under both general and/or specific instructions. This position involves supporting LANSCE 24-hours, 7-days per week beam operation, which will involve work at odd hours (when required) and on-call duties. The successful candidate must be willing to work overtime occasionally and serve on-call to support 24/7 accelerator operation and maintenance.

For full consideration applicants must submit a resume and a comprehensive cover letter that addresses the Minimum and Desired requirements of the position.

Engineered Systems Technician 2 ($53,700.00 -$82,500.00)

The successful candidate has demonstrated semi-skilled knowledge and skills in troubleshooting and repairing some sort of electrical and mechanical systems to perform the day-to-day tasks. On a routine basis and under detailed directions from the team leader or senior technician, the candidate will, with their fellow technicians, troubleshoot, repair and rebuild the electro-mechanical devices. The responsibilities include but not limited to assembling mechanical parts looking at the mechanical and electrical interactions and drawings, wiring the necessary cables and wires, soldering the electrical equipment, machining parts needed, rebuilding the devices, adjusting the tolerances on the machine shop made parts, looming the micron level carbon fibers to mount the stripper micron level, extremely delicate fibers and able to communicate effectively with scientists, engineers and technicians within and outside the group.

Engineered Systems Technician 3 ($64,700.00 -$101,400.00)

The successful candidate has demonstrated "skilled/fully proficient/journeyman level" knowledge and skills on all the responsibilities as mentioned for Tech 2. In addition to that, the technician at this level is expected to be able to perform with minimum supervision from a senior technician and/or team leader. The successful candidate is expected to be able to perform leak checks on the rebuilt devices and for other teams within the group.

What You Need

Minimum Job Requirements:

Engineered Systems Technician 2

• Experience working on any mechanical and electrical systems.
• Experience using mechanical tools and precision measuring devices such as calipers, micrometers, etc.
• Experience with soldering techniques and operations.
• Experience with electrical wiring.
• Demonstrated ability to read and interpret electrical and mechanical drawings.
• Be capable of mounting the micron thick fibers and foils onto a frame which requires extremely steady hands, good vision and attention to details.
• Be capable and willing to work in radiation areas while adhering to ALARA (As Low As Reasonably Achievable) principles.
• Demonstrated ability to interact and communicate effectively with scientists, engineers, and technicians.
• Ability to obtain a Q clearance which often requires U.S. citizenship.

Engineered Systems Technician 3

• In addition to the requirements above:
• Experience in electro/mechanical assembly, mechanical fabrication, and maintenance of mechanical and electronic equipment.
• Demonstrated experience using electrical test equipment such as multi-meters, and AC/DC power supplies.
• Applied knowledge of principles of vacuum technology.
• Experience with the standard machining operation such as turning, milling, drilling and grinding and hand tools.

Education/Experience Engineered Systems Technician 2

Position requires a high school diploma and a minimum of 3 years of related experience, or an equivalent combination of education and experience.

Education/Experience Engineered Systems Technician 3

Position require an Associates' Degree in a related field and a minimum of 3 years of related experience, or an equivalent combination of education and experience directly related to the occupation.

Desired Qualifications:

• Experience working with intricate and detailed mechanical, pneumatic and electronic assemblies.
• Experience in the fabrication of mechanical parts working from sketches, formal drawings, or oral instructions.
• Design, fabrication and/or maintenance of accelerator equipment.
• Experience using optical tooling such as alignment telescopes.
• Certified IPC Specialist (IPC J-STD-001) for soldered electrical and electronic assemblies.
• Knowledge and experience working on an accelerator facility or on similar technology.

Note to Applicants:

Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory.

Essential Job Functions (can perform with or without reasonable accommodation): Peripheral vision, depth perception, reading vision, distance vision, Ability to discriminate speech, ability to hear in a normal range (500 to 3000 Hz), sitting, standing, walking, climbing stairs, climbing ladders, bending, stooping, crouching, kneeling, twisting the trunk or back, reaching overhead, reaching horizontally, reaching down and applying torque with hands or arms, lifting 30+ pounds.

Work Environment:

• Working overtime occasionally or irregular schedule.
• Operation of specialized heavy equipment.
• Operation of motor vehicles.
• Work under unusual lighting conditions.
• Work near electrical power supplies.
• Work near sources of ionizing radiation.
• Work near machinery with moving parts.
• Irritant chemicals.
• Headgear or head protection.
• Safety glasses or eye protection.
• Mask or respirator.
• Hearing protection gloves or hand protection.
• Safety shoes or protective foot gear.

Work Location:

The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management.

Position Commitment:

Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year.

Where You Will Work:

Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes:

• PPO or High Deductible medical insurance with the same large nationwide network
• Dental and vision insurance
• Free basic life and disability insurance
• Paid childbirth and parental leave
• Award-winning 401(k) (6% matching plus 3.5% annually)
• Learning opportunities and tuition assistance
• Flexible schedules and